Find Glass Cutting Table, Laminated Glass Cutting Machine, CNC Cutting Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Glass Cutting Machine > Float Glass Cutting Equipment for Sale

Float Glass Cutting Equipment for Sale

Payment Type: L/C, T/T
Min. Order: 1

Basic Info

Model No.:  SZ-ST4026

Product Description

Model NO.: SZ-ST4026 Certification: CE Control System: Industrial Computer Laminated Glass Cutting: 3+3mm to 8+8mm Precison: 0.15mm Film Carving: Available Trademark: SAGERTEC Origin: Beijing, China Type: Glass Cutting Machine Structure: Horizontal Condition: New Float Glass Cutting: 2-19mm Foward&Backward Double Direction Cutting: Available Low-E Film Remove: Available Specification: 4250*2800*900mm Float glass cutting equipment
Equipped with:
Control panel with incorporated independent Computer WiFi and 21" Touch Screen, software packet with optimization program developed in Multitasking systems with 250 parametric preconstructed shapes, user graphic interface for the managing of the cutting cycle and machine monitoring, hydraulic tilting surface, air cushion, ventilator for the movement of the sheet on the surface, , double zero for the cutting of laminated glass, security systems following the laws, handbook in English.
Max. Workable glass sheet mm. 3700x2600.
Workable thickness From 2 to 19 mm (0.079 to 0.748 in). Machine can cut every kind of glass (except tempered ones)
Safety of the glass presence:
A sensor is placed on the cutting head, to stop the machine in case of lack of glass sheets
Management of mechanisms:
Immediate and controlled braking of the bridge and the cutting head, as soon as an emergency occurs.
Weight Kg. 2200
Work surface height:
Adjstable from 890 to 960 mm (34.65 to 38.19 in)
Maximum installed power Kw 10
Sliding systems:
Sliding systems of the bridge are made with a pinion-rack system. The racks and the pinions are tempered and refaced. They have a ± 0.02 mm tolerance with 1.20 mt (47.24 in) length. The teeth racks are turned towards low. One pinion are placed on the two sides of the bridge (two in all), to keep always perpendicular the bridge to the cutting table during the acceleration and deceleration phases.
On Two side of the table is applied one linear guide and one rack, to obtain a overall bridge stability during the cutting cycle.
Cutting bridge:
The cutting bridge is made in rigid Steel. The whole system is very stable and insensitive to temperature changes, assuring a minimum wear and tear.
Cut trolley Made in aluminium. The cutting head is made with special machines with hundredth tolerances. Going up and down system of the cutting head is guided by a system with re-circulation of ball-bearings, to reduce the friction as much as possible and guarantee the cutting head reply to glass sinkings.
Glass sheet squaring:
The alignment of glass sheet is automatic trought laser 3Directions.
Work surface Made in very hard wood, covered with woollen felt of high density and compactness, 4 mm thick (0.157 in).
Laser scanning (Optional Included):
Laser System for copying of the shapes, of any material, with double control of the correct survey of the points.
Performance:
Maximum speed of the bridge and cutting head 160 m/min
Max. Acceleration 0.8 sec. From 0 to max. Speed
Max. Deceleration 0.8 sec. From max. Speed to 0
Accuracy:
Max. Difference in length between two diagonals for an area bigger than 2mq (21.528 sq. Ft. ) (glass 3 mm thick) (1.118 in. ) +/-0.20 mm (0.0196 in)
Rectilinearity tolerance (glass 3 mm thick) (1.118 in. ) +/- 0.15 mm (straight cutting) +/-0.20 mm ( shape cutting).
User interface:
On a Multitasking systems, control of three interpolated axles, easy-to-use, with icons and buttons of the relevant command, with Computer WiFi and 21" Touch Screen.
Optimisation program:
Optimization software PerfectCut
Included a 250 parametric shapes library, import/export data.
Low-e removal system (Optional):
The low-e removal happens through a system fixed on cutting head, positioned in front of the cutting system. It deals with a metallic router that allows of remove the coating of the glass both in rectilinear that in shaped. The quality of remove is better than the classical grinding wheel.
The wire brush, which removes the coating, is put in rotation by a Electric motor that running at 20.000 rpm.
Coating must be removed before cutting.
Max. glass size 4000*2800mm
Working table height 900mm+-50mm
Speed 0-160m/min
weight 2200kg

Contact us if you need more details on Glass Cutting Table. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Laminated Glass Cutting MachineCNC Cutting Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Glass Cutting Machine

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters